Cadac TRIO POWER PAK Manual De Instrucciones página 4

• Insert the gas cartridges into the unit by aligning the grooves, then push the
cartridge inwards and turn clockwise as shown (Fig. 4).
• Turn the control knob on the Power Pak anti-clockwise to increase the gas fl ow (Fig.
5).
• Then turn on the appliance you wish to operate, and light the appliance.
• Adjust the control knob, to reach the desired level gas fl ow to the appliance.
• Heat control to be done using the appliance control knob.
4. To disassemble the unit
• Close the control knob.
• Remove the cartridge by turning counterclockwise and remove.
• Disconnect the hose from the appliance and pack the unit away for storage.
• Cartridges should always be stored in a cool, dry, well-ventilated area.
5. Checking for leaks (Gas cartridge)
• To check the gas cartridge for leaks, apply soapy water to the connection area of
the gas cartridge and see if any bubbles are visible. Any leakage will be seen as
bubbles coming from the leakage point. If you cannot remedy any leakage, return
the cartridge to your stockist.
6. Spares
• Always use genuine CADAC spares as they have been designed to give optimum
performance.
Item Spare No.
370-SP011
370-SP003
(30mbar)
370-SP013
(50mbar)
503-0766 LEV2 (370) Trio Power Pak K3 - User Manual (All).indd 2
Item Spare No.
370-SP012
370-SP005
2 2
1.
Brass nut
Hand Wheel
2.
3.
Fig. 3
Fig. 4 Fig. 4
Fig. 5
GB GB
2019/12/19 15:19:53