Suzuki 94400-3186 Serie Instrucciones De Instalación página 3

Installation
Installation
1. Remove the each bolts of the
clutch cover and install the
Bracket (F, R) E and bracket
(R, R) G with them.
NOTE: Install the clamp (A) out-
Tighten the clutch cover bolts to
the specified torque.
Tightening torque
2. Remove the each bolts of the
generator cover and install the
Bracket (F, L) F and Bracket
(R, L) H with them.
Tighten the generator cover
bolts to the specified torque.
Tightening torque
3. Install the Nuts D to the Under
Cowling B.
side of the Bracket (F, R)
E.
Clutch cover bolt:
10 N·m (1.0 kgf-m, 7.0 lbf-ft)
Generator cover bolt:
10 N·m (1.0 kgf-m, 7.0 lbf-ft)
Bolt Bolt
GENUINE SUZUKI ACCESSORIES
(A)
Bolt Bolt
Bolt Bolt
3/5