Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Overview
Keypad
F1
F2
CAL
STO
RCL
E N T E R
AR
PRT
ESC
2
EN English
HandyLab 680
The HandyLab 680 meter enables you to perform measurements (pH, conduc-
tivity, D.O.) quickly and reliably.
The HandyLab 680 meter provides a maximum degree of operating comfort,
reliability and measuring certainty.
Keys are indicated by brackets <..>.
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec). A long keystroke (approx. 2 sec) is indicated by the underscore behind
the key symbol (e.g. <ENTER
<F1>:
Situation dependent function (is shown on the display) e.g.:
_
<F1
>:
<F1>/[Menu]: Opens the menu for measurement settings
<F2>:
<F1
_
<F2
>:
<On/Off>:
Switches the meter on or off
<M>:
Selects the measured parameter
<CAL>:
Calls up the calibration procedure
_
<CAL
>:
Displays the calibration data
<STO>:
Saves a measured value manually
_
<STO
> :
Opens the menu for the automatic save function
<RCL>:
Displays the manually stored measured values
_
<RCL
>:
Displays the automatically stored measured values
<><>:
Menu control, navigation
<><>
<ENTER>:
Opens the menu for measurement settings / confirms entries
_
<ENTER
>:
Opens the menu for system settings
<AR>:
Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
<PRT>:
Sends data to the interface (USB)
_
<PRT
> :
Opens the menu for automatic output to USB
<ESC>:
Cancels an action
_
>).
_
>/[Menu]: Opens the menu for system settings
HandyLab 680
ba77040y01
04/2014
Tabla de contenido
