Idiomas disponibles
Idiomas disponibles
A. Permanent override:
Insert the key into the switch.
After 10 seconds the program contained in the key will be executed without
clearing the program contained in the time switch.
As soon as the key is removed the program of the time switch is again valid.
B. Copy (load) / Save (save):
The key makes it possible to save a program contained in the time switch.
It is also possible to copy the contents of the key into the clock.
1. Insert the key and wait for 2 sec.
2. Using menu, select the mode:
save : to save a program contained in the time switch,
load : to load the program of the key into the time switch,
: to check the program contained in the key.
3. Validate the selection with enter.
4. For save and load reconfirm with enter.
The following error messages may appear on the screen:
no prog: the key is empty, it does not contain any program.
Error:
DT1-K: the key is that of a two-channels switch.
DT2-K: the key is that of a one-channel switch.
In these two cases:
Only the save mode is possible.
The error message remains on display as long as the key is present, but
in this case the program of the time switch is executed.
Setting time and day
Select the mode
Modify the day, month, year, the hour and the minutes using
Winter/summer time change
The time switch next suggests the winter / summer time changes
Select the type of change desired using
Validate with enter.
with
menu
then enter.
+
or -.
6
+
or
-
and enter.
.
