Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2
Technical data
Pressure reducer 9000 / 9040
DN
Threaded nozzle
connection
DIN EN 10226-1
Installation length
without nozzle in mm
Installation length
with nozzle in mm
max. weight in kg*
Medium
Environment
Admission pressure
Back pressure
Materials
Temperature range
*depending on version
3
Installation and setting
The pressure reducer, which is factory-set to 3 bar of back pressure (for SP version),
must be installed in the pipeline without stress. Make sure that the correct seals are
fitted and only suitable tools are used!
It is advisable to maintain to a calming section of 5 x DN and to install shut-off valves
on the admission and back-pressure sides. Also observe other local standards and
regulations.
Assembly and maintenance instructions - 9000 / 9040
15
20
½"
¾"
80
90
140
160
1,0
1,2
Potable water; other media on request
In the presence of UV radiation or aggressive vapours, the
variant with metal filter screen cup must be used!
Clear view filter screen cup: max. 16 bar
Metal filter screen cup: max. 25 bar
Housing from lead-free gunmetal/stainless steel
Screen from stainless steel & plastic
Elastomer parts from EPDM
Filter screen cup from plastic
Observe the local disposal regulations!
Clear view filter screen cup: to 40°C
Metal filter screen cup: to 85°C
25
32
1"
1 1/4"
100
105
180
200
2,0
2,2
SP: 1.5 – 7 bar
HP: 3 – 12 bar
LP: 0.5 – 3 bar
Valve insert from plastic
Valve top from plastic
40
50
1 ½"
2"
130
140
225
255
3,8
4,6
www.goetze-armaturen.de
Tabla de contenido
