Using The Cd-Rom Manual; Reading The Cd-Rom Manual - Sony UP-X898MD Manual De Instrucciones

Using the CD-ROM
Manual
The supplied CD-ROM includes manuals for this printer
(in Japanese, English, French, German, Italian, Spanish,
Dutch, Swedish, Portuguese, Danish, Finnish,
Norwegian, Polish, Greek, Czech, Hungarian, Russian,
Romanian, Bulgarian, Slovakian, Slovenian, Estonian,
Latvian, Lithuanian, Croatian, Korean and Kazakh). The
copies of these manuals are created in pdf (Portable
Document Format).
Preparations
One of the following programs must be installed on your
computer in order to use the operation manuals
contained on the CD-ROM disc.
• Adobe Reader Version X or higher
Memo
If Adobe Reader is not installed, you can download it
from the following URL:
http://www.adobe.com/
Adobe and Adobe Reader are trademarks of Adobe Systems
Incorporated in the United States and/or other countries.

Reading the CD-ROM Manual

To read the manual on the CD-ROM, proceed as follows.
1
Insert the CD-ROM disc in your CD -ROM drive.
The manuals are saved in the Instructions For Use
folder.
2
Select and click the manual that you want to read.
Memo
The files may not be displayed properly, depending on
the version of Adobe Reader. In such a case, install the
latest version you can download from the URL
mentioned in "Preparations" above.
Note
If you lose the CD-ROM disc or you cannot read it for
some reason, you can purchase a new CD-ROM disc.
Contact your nearest Sony service representative.
8
GB
Using the CD-ROM Manual / Specifications
Specifications
Power requirement
100 to 240 V AC, 50/60 Hz
Input current 1.3 A to 0.6 A
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Operating humidity
20% to 80%
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20% to 80%
Storage and transport pressure
700 hPa to 1,060 hPa
154 × 88 × 240 mm (w/h/d)
Dimensions
(6 1/6 × 3 1/2 × 9 1/2 inches)
Mass 2.5 kg (5 lb 8.2 oz) (printer only)
Thermal head Thin-film thermal head, 1280 dots
Gradation 256-level gradation (8-bit)
Resolution (when "SC:WD1" is selected from "-SCAN"
of "VIDEO")
NTSC: 720 × 504 dots
PAL: 720 × 604 dots
Picture size (when "SC:WD1" or "SC:NOR" is selected
from "-SCAN" of "VIDEO")
When "SIDE:OFF" is selected from
"-SIDE" of "VIDEO"
NTSC: 94 × 73 mm
PAL: 94 × 71 mm
When "SIDE:ON" is selected from
"-SIDE" of "VIDEO" "SIDE"
NTSC: 124 × 96 mm
PAL: 127 × 96 mm
Printing speed About 1.9 sec./image (at standard
setting) (when "HI" is selected from
"-SPEED" of "CONFIG.")
About 3.3 sec./image (at standard
setting) (when "NOR" is selected
from "-SPEED" of "CONFIG.")
Picture memory For Video
10 frames (800k x 8 bits for one
frame)
For Digital
Max. 4096 x 1280 dots
Input connector VIDEO IN (BNC type)
NTSC or PAL composite video signals
1.0 Vp-p, 75 ohms (NTSC/PAL
automatically discriminated)
Output connector
VIDEO OUT (BNC type)
Loop-through output VIDEO IN (the
automatic termination)