Sony UP-X898MD Manual De Instrucciones página 21

Interface Hi-Speed USB (USB 2.0)
USB connector (type A): USB flash
drive only
USB connector (type B)
REMOTE connector (stereo mini jack)
1 GND
2 PRINT SIGNAL (TTL)
Input of LOW pulse over 100 msec.
initiates print.
3 PRINT BUSY (TTL)
Goes HIGH during printing
Accessories provided
Before Using this Printer (1)
CD-ROM (including multi-lingual
operation instructions, Readme and
printer driver) (1)
Service Contact List (1)
Thermal head cleaning sheet (1)
USB flash drive ex cable
1-848-418-11 (Sony) (1)
Thermal Print Media UPP-110HG (1)
Optional accessories
Thermal Print Media
UPP-110HG (High Glossy)
UPP-110HD (High Density)
UPP-110S (High Quality)
Remote commander RM-91
Foot switch FS-24
Caution
Do not use the FS-24 in a place (such as an operating
room) exposed to liquids, etc., since the FS-24 conforms
to IPX3 waterproof Ingress Protection Rating. In such a
place, use a product which conforms to IPX6 or higher.
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
The design and these specifications are subject to
change without prior notification.
Note on print media
Do not re-use
Doing so may result in malfunction and
negatively affect printing results.
Notes
• Always verify that the unit is operating properly
before use.
SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
FAILURE TO PRINT CONTENT OF ANY TYPE
OR LOSS OF DATA DUE TO FAILURE OF THIS
UNIT OR ITS PRINTING MEDIA, ASSOCIATED
SOFTWARE, EXTERNAL STORAGE, OR
OTHER EXTERNAL DEVICE.
• SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON
WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
If the unit is suddenly taken from a cold to a warm
location, or if ambient temperature suddenly rises,
moisture may form on the outer surface of the unit
and/or inside of the unit. This is known as
condensation. If condensation occurs, turn off the unit
and wait until the condensation clears before operating
the unit. Operating the unit while condensation is
present may damage the unit.
The life expectancy of the electrolytic capacitor is
about 5 years under normal operating temperatures
and normal usage (8 hours per day; 25 days per
month). If usage exceeds the above normal usage
frequency, the life expectancy may be reduced
correspondingly.
If this unit is to be used together with devices that emit
strong radio waves, such as a radio knife, always
verify that the unit is operating properly before use and
ensure that there is no failure of the unit.
9
GB
Specifications