Fermax 9022 Guia De Inicio Rapido página 4

Cod.94838 V04_14
STANDBY OPERATION (The telephone must be hung up).
INDICATIONS
LED OFF
Intercom line busy
Intercom line free
TO MAKE AN INTERCOM CALL
Check that the audio
channel is not busy (indicator
led is OFF).
TO ATTEND AN INTERCOM CALL
KIT CITY BUS MULTIWAY Ref. 9022
PUSHBUTTONS DESCRIPTION
Telephone Ref. 8084 required in installations with intercom
and outdoor panel. It is used the Switcher Ref. 9017.
LED ON LED BLINKING
The telephone
disabled the external call
(outdoor panel call).
Pick up the handset. The indicator
led turns ON.
The telephone called emits a calling sound. Both telephones can establish a private conversation. The indicator led
turns on in all the telephones except in the ones that are having communication.
* If the call is unattended, the system goes to a standby status in 40 seconds.
* The conversation time is limited to 4 minutes until one of the telephones has been hung up.
* If any of the telephones stay off the hook, the indicator led remains ON to warn it.
* If a telephone off the hook is called, no call sound is generated but audio is connected anyway.
* If an external call is made during an intercom conversation, a soft tone can be heard.
bip
CALL to
GUARD UNIT
Press the button
If there were a MDS Guard
Unit, a «bip» would sound
has
in the telephone.
press the «main» telephone number
directly.
* When a telephone number is pressed the indicator led turns off.
* After pressing the indicator led blinks during 5 seconds, asking for slave telephone number.
* If the call is unattended, the system goes to the standby status in 40 seconds.
Telephones must be programmed, as
explained in
«PROGRAMMING».
It is posibble to connect up to 12
extensions in each dwelling, 6 «main»
and 6 «secondary» ones.
It is possible to restrict the
communication between secondary
telephones. This is to say: disallow
calls between them.
Telephones are full privacy.
The call tones are different depending
on where the call is comming from:
intercom call or outdoor panel call.
FUNCTIONS
bip
ENABLE / DISABLE
external call
Press the button
Press
alternately to enable/disable
communicate with the outdoor pa-
the call.
nel and then the button
1º
Press + «secondary» telephone number.
the next page:
OPEN the DOOR without
hanging up the handset
the button to
2º
Secondary
telephone
number