Idiomas disponibles
Idiomas disponibles
1
3
4
5
6
3
HEAT
*For mark 6 button, it is AUTO MODE for cooling only, and it is
HEAT for heating model.
1.
Power:
Turn the air conditioner on and off.
2.
Cool:
Press the COOL button to COOL mode.
3.
and
:
Use these buttons on the control
panel and remote to increase or decrease the
Set Temperature or Timer. Temperature range:
61 ~88
or 16 ~31 .
4. Sleep:
Press the SLEEP button, all
of the display lights will turn off after a while, but
the Sleep light is always on. In SLEEP mode, the
air conditioner will automatically adjust the
temperature and fan speed to make the room
more comfortable during the night. The set
temperature will automatically raise every 30-60
minutes, and at most change sixtimes until the set
temperature is 81 or 82 .
NOTE:
5. Timer:
and remote to set the Timer.
Timer Off: The timed stop is programmed by
pressing TIMER button. Set the rest time by
pressing the button
time displayed is to your demand then press
TIMER button again.
2
Timer On: When the unit is off, press TIMER
button at the first time, set the temperature with
pressing the button
button at the second time, set the rest time with
pressing the button
7
button at the third time, confirm the setting, then
the rest time to next automatical switching-on
could be read on the display of the machine.
8
NOTE:
9
in 0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
10
Timer can be set in 0.5 hours increment below
10 hours and 1 hour increment for 10 hours or
above. The SET light will turn on while setting.
To cancel the setted function, press the TIMER
button again.
6. a.Auto Mode:
chooses the fan speed and the mode of operation
(COOL,DRY or FAN). In this mode the temperature
is set automatically according to the room
temperature (tested by the temperature sensor
which is incorporated in the indoor unit.).
It is for cooling only model.
b.HEAT: Press the HEAT button to HEAT mode.
It is for heating model.
7. Fan Speed:
choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL mode and
choose Hi, Med, Low in FAN mode.
8. Display:
switch off/on all lights or LED display.
Eco:
9.
will turn on. In ECO mode, the unit will turn-off
once the room is cooled to the user set
temperature.
The unit will turn back on when the room
temperature rises above the user set
temperature. Before the compressor stars, the fan
motor will run for a while, then it will stop for a
while-and will repeat to provide a much more
comfortable-feeling and save energy.
10.
Fan Only:
ONLY mode.
15
Use these buttons on the control panel
or
or
or
It can be set to automatically turn off or on
In AUTO mode the unit automatically
Press the FAN SPEED button to
To press the DISPLAY button, it can
When the unit is in ECO mode, the light
Press the Fan Only button to FAN
until the rest
. Press TIMER
. Press TIMER
Capítulos
