Introduction; Dear Customer; Driving And Transport On Public Roads; Towing - Husqvarna Gardol G125-85F Manual De Instrucciones

Dear Customer,

Thank you for choosing a Gardol Fronmower. Gardol Front
Mower are built to a unique design with a front-mounted
cutting unit. The machine is built to give maximum efficiency
even in small and confined areas.
This operator's manual is a valuable document. By following
its instructions (on operation, service, maintenance, etc.) you
will significantly extend the life of the machine and even its
second-hand value.
When you sell your Frontmover, make sure you pass on the
operator's manual to the new owner. Ensure that all service
steps are documented. A well-documented service history
reduces the costs of seasonal maintenance and influences
the second-hand value of the machine. Take the operator's
manual along when the machine is left to the workshop for
service.
Driving and transport on public
roads
Check the relevant road traffic regulations before driving the
machine on a public road. If transporting the machine on
another vehicle always use approved securing devices and
make sure that the machine is securely held.

Use

This ride-on mower is designed to mow grass on open and
level ground surfaces. The machine may only be used with the
equipment recommended by the manufacturer. All other types
of use are incorrect. Compliance with and strict adherence to
the conditions of operation, service and repair as specified by
the manufacturer also constitute essential elements of the
intended use.
This machine should be operated, serviced and repaired only
by persons who are familiar with its particular characteristics
and who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally
recognised regulations on safety and occupational medicine,
and all road traffic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may
relieve the manufacturer of liability for any resulting damage
or injury.

Good service

When you need spare parts or support in questions about
service, warranty issues, etc., please consult the retail outlet.
On the machine's rating plate you will find the following
information:
• The machines type designation.
• The manufacturer's type number.
• The machine's serial number.
State the type designation and serial number when ordering
spare parts.

INTRODUCTION

– 113
English