Sena Intercom 30K Manual Del Usuario página 53

Music / FM Radio
Mesh Intercom
Note:
1. Voice command performance may vary based on the environmental conditions including riding
speed, helmet type and ambient noise. To improve the performance, minimize wind noise on the
microphone by using a large microphone sponge and closing the visor.
2. To activate the voice command during non-standby functions, tap the Ambient Mode Button
once.
3. If the headset is in standby mode for longer than one minute then the microphone will
automatically be disabled and the Voice Command feature cannot be activated by saying "Hello
Sena". The Voice Command feature will need to be activated by tapping the Ambient Mode
Button once.
11.1 Voice Command Setting (Default: Enable)
A Voice Command setting can be found in the settings menu, accessible through Sena Device Manager
or Sena Smartphone App. Please refer to Section 3.6: "Downloadable Sena Software" for more
details.
When Voice Command is enabled, you can use your voice to give a command the headset operate
certain operations completely handsfree. If Voice Command is disabled, you will need to operate all of
the functions using the buttons on the headset.
Configuration menus
Next track (music) / next preset
(FM radio)
Previous track (music) / previous
preset (FM radio)
Stop music / FM Radio
Mesh Intercom On/Off
Create a Mesh
Quit the Mesh
"Configuration"
"Next"
"Previous"
"Stop"
"Mesh Intercom" / "End
Intercom"
"Create Mesh"
"Quit Mesh"