Hd Intercom (Default: Enable) - Sena Intercom 30K Manual Del Usuario

Ocultar thumbs Ver también para Intercom 30K:

Tabla de contenido

The VOX Intercom setting can be found in the settings menu, accessible through Sena Device Manager

or Sena Smartphone App. Please refer to Section 3.6: "Downloadable Sena Software" for more

details.

If VOX Intercom is enabled, you can initiate an intercom conversation with the last connected intercom

friend by voice. When you want to start intercom, say a word such as "Hello" loudly or blow air into the

microphone. If you start an intercom conversation by voice, the intercom terminates automatically when

you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom

conversation by tapping the Jog Dial, you have to terminate the intercom conversation manually.

However, if you start the intercom by voice and end it manually by tapping the Jog Dial, you will not be

able to start intercom by voice temporarily. In this case, you have to tap the Jog Dial to restart the

intercom. This is to prevent repeated unintentional intercom connections by strong wind noise. After

rebooting the headset, you can start the intercom by voice again.

7.10.

Intercom VOX Sensitivity (Default: 3)

The Intercom VOX Sensitivity setting can be found in the settings menu, accessible through Sena

Device Manager or Sena Smartphone App. Please refer to Section 3.6: "Downloadable Sena

Software" for more details.

The sensitivity can be adjusted depending on your riding environment. Level 5 is the highest sensitivity

setting and 1 is the lowest.

7.11.