2
3
-The orientation of the sensor on the external
neutral has to be the same as the orientation of
the sensors installed on the CB.
-L'orientamento del sensore sul neutro esterno
deve essere uguale all'orientamento dei sensori
installati sul CB.
-Der Sensor auf dem externen Neutralleiter
muss in derselben Weise wie die Sensoren auf
dem Leistungsschalter ausgerichtet sein.
-L'orientation du capteur sur le neutre extérieur
doit être identique à celle des capteurs installés
sur le disjoncteur.
-La orientación del sensor en el neutro exterior
debe ser igual a la orientación de los sensores
instalados en el IA.
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 140G-IN116A-MU-P - April 2013
75 (2.95")
40 (1.57")
UP
2
1
LINE
In
LOW
LOAD
140G-K-CC
(ORDERED
SEPARATELY)
Ø
11 (0.43")
600 A = 140G-M-NCTD60
800 A = 140G-M-NCTD80
UP
LOW
X4
Upper terminal
Terminale superiore
Oberer Anschluß
Prise supérieure
Terminal superior
2
1
In
Lower terminal
Terminale inferiore
Unterer Anschluß
Prise inférieure
Terminal inferior
140G-M
52.5
(2.06")
10
115
(4.53")
DIR 1000436R0650 (L2548)
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
(0.39")
