Residual Risks; Saw Blades; Safety Of Others - Stanley FATMAX FME720 Manual De Instrucciones

English
(original instructions)
● Do not use any abrasive discs.
● Raise the blade from the table insert in the workpiece prior
to releasing the on/of switch.
● Do not wedge anything against the fan to hold the motor
shaft.
● The blade guard on your saw will automatically raise when
the arm is brought down; it will lower over the blade when
the arm is raised. The guard can be raised by hand when
installing or removing saw blades or for inspection of the
saw. Never raise the blade guard manually unless the
machine is switched off.
● Check periodically that the motor air slots are clean and
free of chips.
● Do not work with material containing asbestos. Asbestos
is considered to be carcinogenic.
● Never make the warning signs on the power tool
unrecognisable.
● Never stand on the power tool. Serious injuries could
occur when the power tool tips over or when coming in
contact with the saw blade.
● Do not take hold of the saw blade after working before
it has cooled. The saw blade becomes very hot while
working.
● Advance the saw blade against the workpiece only when
it is switched on. Otherwise, the danger of kick-back exists
when the saw blade catches in the workpiece.
● The intended use is described in this instruction manual.
The use of any accessory or attachment or performance
of any operation with this tool other than those
recommended in this instruction manual may present a
risk of personal injury and/or damage to property.
● Never place hands near cutting area. Keep hands outside
the "No Hands Zone" which includes entire table and is
labelled by "No Hands" symbols.
● To avoid injury from materials being thrown, unplug the
saw to avoid accidental starting, and then remove small
materials.
● Before use and after any maintenance the blade guard
must be checked to ensure proper function. This test must
be performed with the saw switched off and unplugged.
The arm must be raised and lowered to ensure the
guard covers the blade and the blade does not contact
the guard. If the guard fails to operate correctly, have
your power tool serviced by a qualified repair agent.
Call Stanley Fat Max customer services for you nearest
service agent.

Residual risks

The following risks are inherent to the use of saws:
● Injuries caused by touching the rotating parts.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These are:
● Impairment of hearing.
● Risk of accidents caused by the uncovered parts of the
rotating saw blade.
● Risk of injury when changing the blade.
● Risk of squeezing fingers when opening the guards.
8
● Health hazards caused by breathing dust developed when
sawing wood, especially oak, beech and MDF.
Additional safety instructions for lasers
This laser complies with class 1M according to IEC 60825-
1:2007. Do not replace a laser diode with a different type.
If the laser is damaged, have the laser repaired by an
authorised repair agent. Do not use the laser for any purpose
other than projecting laser lines.
● Never look into the laser beam directly and intentionally.
● Do not use optical tools to view the laser beam.
● Do not set up the tool where the laser beam can cross any
person at head height.
@
● Do not let children come near the laser.
Warning! Avoid direct eye contact. Laser
radiated when laser guide is turned on. Avoid
direct eye contact. Always un-plug the mitre
saw from power source before making any
adjustment.
● A laser pointer is not a toy and should not come into
hands of children. Misuse of this appliance can lead to
irreparable eye injuries.
● Any adjustment to increase the laser power is forbidden.
Any liability for damages as a result of not following these
safety instructions will be rejected.
● When using the laser pointer, do not point the laser
beam towards people and/or reflecting surfaces. Even
a laser beam of lower intensity may cause eye damage.
Therefore, do not look directly into the laser beam.
● The laser pointer includes no servicing components. Do
not open the housing otherwise the guarantee is void.

Saw blades

● Do not use blades of larger or smaller diameter than
recommended. For the proper blade rating refer to the
technical data. Use only the blades specified in this
@
manual, complying with EN 847-1.
Warning! Never use abrasive wheels.

Safety of others

● This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the tool by a person responsible for
their safety.
● Children should be supervised to ensure that they do not
play with the appliance.
Vibration
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured in
accordance with a standard test method provided by EN62841
and may be used for comparing one tool with another. The
declared vibration emission value may also be used in a
preliminary assessment of exposure.