Typical Application - Kathrein UFO 356/TP Manual De Instrucciones

8 Notes
Mixed operation of UFO 356/TP with UFO 386/TP.
When using in older base and extension units, see following note.
Note:
When extending existing systems (still using power supply order no. 1681794) with UFO 356/TP, note that the power supply
has a lower ampacity. As a result, pay attention to the power consumption information on the power supply label.
When using UFO 356/TP, the upper adjacent channel is specifi ed by the selection of the lower adjacent channel (fi xed adjacent
channel allocation).
The following situation may be present in existing systems:
Channel S30
Allocated to UFO 386/TP
Solution with UFO 356/TP:
Channel S30
UFO 386/TP
One UFO 386/TP must be reprogrammed from channel S32 to channel S33. If only channel S31 is to be allocated, the relevant
output signal from the UFO 356/TP must be switched off.

9 Typical application

Electronic equipment is not household waste - in accordance with directive
2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated
27 th January 2003 on used electrical and electronic equipment, it must be
disposed of properly. At the end of its service life, take this unit for disposal
at a designated public collection point.
Internet: www.kathrein.de
KATHREIN-Werke KG • phone +49 8031 184-0 • Fax +49 8031 184-306 • Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 144 • 83004 Rosenheim GERMANY
Channel S31
To be allocated
Channel S31
UFO 356/TP (Twin I)
Channel S32
Allocated to UFO 386/TP
Channel S32
UFO 356/TP (Twin II)
Channel S33
To be allocated
Channel S33
UFO 386/TP