Idiomas disponibles
Idiomas disponibles
NOTE: During installation, ensure rear belly pan is shingled underneath front belly pan. Failure to do
so may result in damage to belly pan.
41. Position the rear belly pan (1) to the
underside of the vehicle and to the front
fascia (3).
42. Install the fasteners (2) that secure the rear
belly pan (1) to the underside of the vehicle.
Tighten the fasteners securely.
43. Install the fastener (1) that secures the front
fascia assembly to the fender. Tighten the
fastener securely.
44. Install the three fasteners (2) that secure
each front wheel house splash shield to the
front fascia assembly.
45. Remove the supports and lower the vehicle.
5/25/2011
Page 9 of 30
K6860996
