Conexiones De Audio - Behringer EURORACK UB1222FX-PRO Manual De Uso

13
EURORACK UB1222FX-PRO Manual de uso

4.2.1 Conexiones de audio

Para las conexiones TAPE IN/TAPE OUT utilice cables RCA comerciales.
Para las entradas y salidas balanceadas también puede utilizar conectores no
balanceados. Si utiliza jacks estéreo, asegúrese de que el anillo y el vástago
(los polos 1 y 3 en conectores XLR) estén unidos dentro del conector.
1
2
2 1
3
3
output
input
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
For unbalanced use, pin 1 and pin 3 have to be bridged
Fig. 4.2: Conexiones XLR
Unbalanced ¼" TS connector
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
tip
(signal)
Fig. 4.3: Jack macho mono de 6,3 mm
Balanced ¼" TRS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Fig. 4.4: Jack macho estéreo de 6,3 mm
Insert send return ¼" TRS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
return (in)
tip
send (out)
Connect the insert send with the input and the
insert return with the output of the e ects device.
Fig. 4.5: Jack macho estéreo para inserción (ISR)
¼" TRS headphones connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
right signal
tip
left signal
Fig. 4.6: Jack macho estéreo para auriculares