Beurer FT 85 Instrucciones De Uso página 33

If the measurement is over 38°C (100.4°F),
perature is above the normal range.
The measurement is automatically saved with the date/time and the "fever"
The device is ready to take another measurement when two short beeps sound and the forehead symbol
The device automatically switches off after approx. 60 seconds or you can press the
switch it off.
Displaying stored measurements
The device only stores measurements in forehead temperature mode
last 60 measurements.
When 60 memory spaces are exceeded, the oldest value is deleted.
• The memory can be called up as follows:
• With the thermometer switched on, press and hold the MODE/MEM button for 3 seconds.
The most recent measurement is displayed.
• Pressing the MODE/MEM button again will display the measured value.
• In the upper line, the time and date are displayed alternately.
appears in the display to indicate that the body tem-
. The device automatically stores the values from the
33
/ "no fever" classification.
/ SCAN button for 5 seconds to
Fig. 13
stops flashing.