Switching On And Setting The Thermometer - Beurer FT 85 Instrucciones De Uso

7. Switching on and setting the thermometer

To switch on the thermometer, briefly press the
After a brief self-test and two short beeps the thermometer is ready for forehead measurement. The device always starts up in
forehead temperature mode
Set the basic functions
This menu allows you to set the following functions individually, one after another.
Temperature measurement unit
Insert the batteries or press and hold the LIGHT/SET button for 3 seconds when the ther-
mometer is switched on. The temperature measurement unit flashes on the display (Fig. 1).
You can set the device to display the temperature in degrees Celsius (°C) or degrees Fahr-
enheit (°F).
• To display the temperature in Celsius, select °C using the MODE/MEM button and con-
firm with the LIGHT/SET button.
• To display the temperature in Fahrenheit, select °F using the MODE/MEM button and
confirm with the LIGHT/SET button.
The time format flashes on the display (Fig. 2).
• Use the MODE/MEM button to set your preferred time format, and confirm with the
LIGHT/SET button.
/ SCAN button.
.
Time format Date Time
29
Illuminated display Acoustic signal
Fig. 1
Fig. 2