Technical Specifications; Laser And Keypad Overview; How To Use Your Gat220 Laser; Horizontal Set-Up And Operation - Agatec GAT220 Manual Del Usuario

B. Aperture label
AVOID EXPOSURE. LASER LIGHT
IS EMITTED FROM THIS APERTURE

1.3 Technical specifications

Recommended Operating Distance
Leveling Accuracy
Leveling Range
Rotation Speed
Slope Match
Laser Diode
Power
Charging Time
Battery Life
Weight
Size
Environmental

1.4 Laser and Keypad overview

See inside front cover for photos of the laser and keypad corre-
sponding to these callouts.
• Laser overview
1. Rotating head
2. Aluminum head protection with axes indications
3. Laser beam aperture
4. Index marks
5. Batteries
6. Jack for battery charger
7. 5/8 - 11 tripod mount for horizontal set up
4
B
A
1,000 ft. (300 m) diameter
+/- 1/8'' at 100 ft.
(+/-0,010%; +/- 10 mm at 100 m)
+/- 10%, 5.7°
0 - 90 - 600 rpm
Up to 10% in X and Y axes (manual mode);
also X automatic and Y manual
(semi-automatic mode)
635 nm; < 5mW, Class 3R
2 D Size (LR20) alkaline batteries or
rechargeable batteries
15 hours
40 hours with rechargeable batteries
160 hours with alkaline batteries
3 lbs. (1.5 kg)
7.75''x 8''x 5.5'' (19.5 x 21 x 14 cm)
Weatherproof (rain and dust proof - IP64)
• Keypad overview
1. On/Off
2. Low battery indicator / X axis calibration LED
3. H.I. Alert Function/ Change calibration axis
4. H.I. Alert Indicator/ Y axis calibration LED
5. Manual Function/ Save calibration
6. Manual Mode Indicator
7. Rotation speed
8. Set manual slope/ Move calibration beam up
9. Set manual slope/ Move beam down
Italics correspond to indication and keys used in calibration mode.

2. How to use your GAT220 laser

2.1 Horizontal set-up and operation

1. The GAT220 laser can be used directly on the ground or on a
standard 5/8-11 tripod.
2. Press the On/Off key (1) to turn the laser on. The laser does a
self-test when turned on. The beam blinks while the laser is self-level-
ing. After it has leveled, the head will start to rotate.
3. To select the H.I. Alert, press the H.I. key (3). The H.I. Alert func-
tion will be active 30 seconds after the GAT220 has finished its
self-leveling.
4. There are two rotation speeds: 90 rpm and 600 rpm (the default
speed). To change to 90 rpm, press key (7). Press again to stop the
rotation.
5. To turn the laser off, press On/Off .
2.2 H.I. Alert
The H.I. Alert feature stops the laser automatically and sounds an
alarm if the laser is disturbed, preventing inaccurate readings.
It functions only when selected.
To activate this safeguard feature, press the H.I. key (3) after
turning the laser on. The LED (4) will blink rapidly while the laser
is self-leveling.
5