General Information; Description; Safety; Specifications - Agatec A510S Manual De Operación

Although either model of the A510 are very simple to use, we
recommend that you read this manual before operating the laser.

1. General information

1.1 Description

The A510 is an automatic visible laser that can be used for level-
ing, vertical alignment, plumb, and squaring. Applications include
installing suspended ceilings, partitions, and a variety of outdoor
alignment work.
The A510G has a green laser beam that is ideal for using indoors
where a high visibility beam is desired. It can also be used out-
doors with the RCR500G detector.
The A510 laser has these advanced features:
• Automatic self-leveling in both horizontal and vertical modes
• Motorized mount speeds setup for ceilings and partitions
• Manual leveling in X and Y axes for dual slope setting (± 10%)
• Semi-automatic single axis slope setting (automatic leveling in X
and manual leveling in Y)
• Ability to match slope for inclined planes greater than 10%
• Choice of beams, including scanning and chalk line
• Square shot that's left and right adjustable
• Easy electronic calibration

1.2 Safety

The A510 is a Class 3R laser, manufactured to comply with the
international rules of safety IEC 60825-1, 2001. Although the
power of the emission of the beam is less than 5mW in Class 3R,
the following cautions are recommended:
• Do not stare directly at the beam
• Do not set up the laser at eye level
4
A. CDRH warning label for USA
B. Aperture label

1.3 Specifications

A510S
Recommended use (Diameter)
Interior, Up to 200 ft. (60 m)
depends on lighting
Exterior, 1,000 ft. (300m) with RCR500
with detector
Leveling accuracy ± 3/32" at 100 ft. (± 0.0075% ± 7.5 mm at 100 m)
Self-leveling
Leveling range
10% slope match
also, semi-automatic mode with X in automatic, Y in manual
Rotation speed
Scanning angle
Laser class
Visible laser diode
Red diode, 635nm
Power 2 D size (LR20) alkaline batteries or rechargeable batteries
Battery life – alkaline 160 hrs. at 68° F (20° C)
Battery life – rechargeable
40 hrs. / NiCD
Charging time
15 hrs.
Operating temperature 14° to 122° F (-10° to 50° C)
Storage temperature
-4° to 176° F (-20° to 80° C)
Range of remote
Environmental
Size** 11" x 7" x 8" (28 x 18 x 20.5 cm); 5.2 lbs.(2,3 kg)
* In cold temperatures, warm-up may be required.
See "Care and Handling" section.
** With wall mount and rechargeable battery pack
CLASS 3R LASER PRODUCT
WAVE LENGTH 630-680 nm
MAX. OUTPUT POWER: 5mW
LASER LIGHT: AVOID DIRECT EYE EXPOSURE
CONFORMS TO IEC 60825-1; 2001
COMPLIES WITH 21 CFR 1040.10 AND 1040.11
EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE NO. 50
DATED JULY 26, 2001
AGATEC, 2202 Redmond Road
Jacksonville, AR 72076
AVOID EXPOSURE. LASER LIGHT
IS EMITTED FROM THIS APERTURE
B
A
A510G
(Diameter)
Up to 300 ft. (100 m)
1,000 ft. (300m) with RCR500G
Horizontal and vertical
± 10% ; 5.7°
Manual in both X & Y axes;
0, 90,150, 300, 450, 600 rpm
Variable, from 2 to 36°
Class 3R; <5mW
Green diode, 532nm
18 hrs. at 68° F (20° C)
20 hrs. / NiMH
8 hrs.
14° to 104° F (-10° to 40° C)*
-4° to 140° F (-20° to 60° C)
100 ft. (30 m) / 180°
IP54 for water and dust resistance
5