Installation Instructions; Physical Dimensions; Delivery - LeMond Fitness RevMaster Manual De Usuario

Before leaving the manufacturing facility, your LeMond
exercise bike was thoroughly inspected and tested for proper operation.
To minimize shipping damage, careful attention was given to making your
bike ready for shipment. The dimensions of the machine are listed in
Table 1.
Table 1. Dimensions for the LeMond

Physical Dimensions:

Length
Width
Height
Weight

DELIVERY

Your LeMond RevMaster will arrive packed in 1 carton. Upon arrival
fully inspect the carton for damage. Point out any damage to the delivery
person and have the delivery person record the damage on the delivery
paperwork. Contact the Customer Service Department at (425) 482-6773
to report any damage.
Please follow these detailed instructions and you will find that your
bike can be unpacked and assembled with ease.
A. Remove the bike and components from the shipping carton
1. Move the box to the desired location. Ensure that the carton is
standing upright and remove the strapping material.
2. Pull the cardboard edge out along the bottom of the box to
remove the staples. Lift the top of the box up and set aside.
3. Remove the two smaller boxes from the main frame of the bike.
4. Open both boxes and verify that you have all of the hardware
and parts necessary to assemble your bike. You should have an
owner's manual and the following parts:

INSTALLATION INSTRUCTIONS

41.50 inches (105 cm)
22.25 inches (57 cm)
38.00 inches (97 cm)
116 pounds (53 kg)
RevMaster
®
RevMaster
® ™
®
Bike
Page 3