Input Selection - Toshiba XF350 Serie Manual De Instrucciones

Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page
7 for a clear view of the back connection recommendations.
Most media recorders and decoders send a signal through
the SCART lead to switch the television to the correct Input
socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (EXT3C).
o
An S in the display e.g. 2S (EXT 2S), indicates the input
is set for an S-Video signal.

Input selection

Use the Input Selection if the television does not switch over
automatically.
a
At any time by pressing
screen showing all stored programmes and
external equipment. Use
OK to select.
TV
1
2
3C
HDMI1
HDMI2
HDMI3
PC
HDMI™ displays equipment connected to Input
HDMI on the back of the television. It is designed
for best performance with 1080i high definition
signals.
PC displays a computer connected to Input RGB/PC
on the back of the television.
Input selection and
AV connections
o
o
a list will appear on
B b
and to highlight and
INPUT signal selection
This specifies the type of signal going into SCART 2 (EXT2)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
a
In the SET UP menu press
is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU
b
C
With or
required input for EXT2.
PC/HDMI1 audio
HDMI1 audio
HDMI setting
EXT2 input
Woofer
MENU Back
If the colour is missing try the alternative setting.
26
b
until AV connection
SET UP
English
UK
OK
OK
OK
OK
Watch TV
EXIT
c
select either AV or S-VIDEO as the
AV connection
PC
Digital
OK
AV
Internal
EXIT Watch TV
1/2