Package Contents; Description (Fig. A); Electrical Safety - DeWalt DW306K Manual De Instrucciones

breakage of parts and any other conditions that
may affect its operation. Have damaged guards
or other defective parts repaired or replaced as
instructed.
Do not use the tool if the switch is defective.
Have the switch replaced by an authorized
D WALT repair agent.
E
20 Have your tool repaired by an authorized
D WALT repair agent
E
This Power Tool is in accordance with the
relevant safety regulations. To avoid danger,
electric appliances must only be repaired by
qualified technicians.
Additional safety rules for Cutsaws
Plugging into the mains, switching ON and OFF
• Always ensure that the Saw is switched OFF
before plugging into the mains.
• After switching OFF, never attempt to stop the
saw blade with your fingers.
• Never put the saw down on a table or work
bench unless switched OFF. The saw blade will
keep running briefly after the tool has been
switched OFF.
When sawing
• When using saw blades specially designed for
cutting wood remove all nails and metal objects
from the workpiece before starting work.
• Wherever possible, use clamps and vices to
fasten the workpiece securely.
• Do not attempt to saw extremely small
workpieces.
• Do not bend too far forward. Make sure that you
always stand firmly, particularly on scaffolding
and ladders.
• Always hold the saw with both hands.
• For cutting curves and pockets, use an adapted
saw blade.
Checking and changing the saw blade
• Unplug the tool before cleaning or changing the
saw blade.
• Only use D WALT saw blades conforming to the
E
specifications contained in these operating
instructions.
• Only sharp saw blades in perfect working
condition should be used; cracked or bent saw
blades should be discarded and replaced at once.
15

Package contents

The package contains:
1 Cutsaw
1 General purpose saw blade set
1 Allen key
1 Key holder
1 Metal case
1 Instruction manual
1 Exploded drawing
1 Registration card
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your Cutsaw is a versatile Power Tool that has been
designed for professional sawing applications.
1 Variable speed switch with integrated speed
control dial (10)
2 Lock-off button
3 Allen key
4 Key holder
5 Blade holder
6 Saw blade
7 Saw shoe
8 Saw blade fixing screw
9 Housing
10 Speed control dial

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 50144; therefore no
earth wire is required.
Mains plug replacement (U.K. & Ireland
only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
E N G L I S H
en - 3