Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Intended use:
The machine is intended for sawing wood,
plastic, metal and building materials
while resting firmly on the workpiece. It
is suitable for straight and curved cuts
with bevel angles to 45°. The saw blade
recommendations are to be observed.
1.ON/OFF SWITCH
Depress to start and release to stop your tool.
(See Fig. A)
A
B
2. SWITCH LOCK-ON BUTTON
Depress on/off switch (1) then lock-on button
(2) (See Fig. B), release on/off switch first then
lock-on button second. Your switch is now locked
on for continuous use. To switch off your tool just
depress and release on/off switch.
3. VARIABLE SPEED CONTROL
Adjust the thumb-wheel to increase or decrease
the speed (See Fig. C) according to the material,
material thickness and blade specification to be
used (also possible during no load operation).
See Chart 1 for general guidance on speed
selection.
Avoid prolonged use at very low speed as this
may damage your jigsaw's motor.
Chart 1
Material
Wood
34
Metal
Aluminum
PVC
Ceramic
C
4. HAND GRIP AREAS
Always ensure you maintain a firm grip whilst
operating your jigsaw.
5. BLADE FITTING (SEE FIG. D，E，F)
NOTE: Remove the plug from the socket
before carrying out any adjustment, servicing
or maintenance. Wear protective gloves when
assembling the saw blade. You can only use the
blade type shown in Fig D. Don't use other blade
types.
D
E
F
Speed setting
5-6
3-4
3-5
3-4
3-5
Tabla de contenido
