Whirlpool WVA35643 Instrucciones Para El Uso página 28

If the appliance
temperature is too high:
If there is moisture build-
up:
If the doors do not open
and close properly:
Operations Alarms
In the event of operation alarms, they will also be displayed in the digits LEDs, (e.g. Failure1, Failure 2,
etc...) call After-sales Service and specify the alarm code. The acoustic alarm sounds, the
lights up and the F letter on the digit display blinks according to failure code described below:
Failure code
Error 2
Error 3
Error 6
• Are the appliance controls correctly set?
• Has a large amount of food been added to the appliance?
• Check that the door is not opened too often.
• Check that the door close properly.
• Make sure that air flow vents inside the compartment are not
blocked, as this prevents the circulation of cold air.
• Make sure that air flow vents inside the compartment are not
blocked, as this prevents the circulation of air.
• Make sure that the food is properly packaged. Dry any dampness on
food containers before placing them in the appliance.
• Check that the doors are not opened too often. When the door is
opened, humidity from the room air enters the appliance. The more
often the door is opened, the faster humidity builds up, especially
when the room itself is very humid.
• If the room is very humid, it is normal for moisture to build up inside
the refrigerator.
• Check that food packages are not blocking the door.
• Check that the internal parts or automatic ice maker are not out of
position.
• Check that the door seals are not dirty or sticky.
• Ensure the appliance is level.
F letter blink on/off at 0,5 sec. Blinks ON 2 times
then remain off for 5 seconds. Pattern repeats.
F letter blink on/off at 0,5 sec. Blinks ON 3 times
then remain off for 5 seconds. Pattern repeats.
F letter blink on/off at 0,5 sec. Blinks ON 6 times
then remain off for 5 seconds. Pattern repeats.
Visualization
28
Alarm icon
x2
x3
x6