To set the channel
1
Press the + or – channel setting button to change the
indication.
If you hold the button down, the numbers change more
rapidly.
68-02
68-46
68-47
• • •
68-01
+ button
– button
2
Release the button, and wait for about 3 seconds. The
indication stops flashing, and the microphone starts
transmitting on the new channel.
Saving the channel setting in memory
The new channel setting is automatically saved in an
internal memory, and the setting is retained if you remove
the battery. However, if you remove the battery while in
the channel setting mode, the flashing channel number is
not saved in memory, and the original setting is unchanged.
69-01
69-02
69-46
• • •
• • •
69-47
Notes
• Make sure that the channel selected is the same as that
selected on the tuner unit used in the same system.
• Depending on the noise or interference conditions, the
selectable channels may not necessarily all be usable. If
necessary, you can determine the usable channels by
stepping the channel selection through a number of
channels on the tuner with the microphone/transmitter set
to OFF. Those channels on which the RF indicator of the
tuner does not light are usable.
• If there is a TV broadcasting station nearby, to avoid
possible interference with broadcasting, do not use that
station's channel.
9