sanindusa PLAN Instrucciones De Montage Y Manutencion página 43

512057113 /512058113
Concealed electronic flush valve for urinal with infrared
and battery or thransformer
step 1
installing the flush valve
1 – Shut off the water supply.
2 – Cut an adequate opening in the wall to accommodate the
dimensions of the box and the sleeve (not supplied) where you
will accommodate the transformer cable.
3 – Insert the electronic flush valve's box through the wall.
4 – Connect the flush valve inlet to the water supply.
5 – Connect the flush valve outlet nipple to the pipe leading to
the urinal's inlet.
6 – Turn on the water supply. Make sure there is no leakage.
7 – Assemble the temporary protective cover to protect the
flush valve
step 2
connecting the power source
1 – For transformer model, place the transformer near the
electricity plug, insert the transformer cable wire through
2 – Once the electricity, plumbing and tiles works are finished,
replace the temporary protective cover with the plastic seat.
Adjust it using the four screws provided.
//INSTALLATION
2 3
inlet
2 2
outlet