Mellerware Koffy! Manual Del Usuario página 8

Neither parts of this appliance
–
are suitable for cleaning in
the dishwasher.
Then dry all parts before its
–
assembly and storage.
CLEANING THE FROTHING WAND
ATTENTION: The frothing wand,
–
frothing tip, and frothing sleeve
may be very hot.
It is recommended to purge and wipe
–
the frothing wand after steaming milk
to prevent deposits of dirt and before
turning off the machine.
To do this, pull the black frothing
–
sleeve down, fill a cup with a bit of
water, immerse the frothing wand
into the water, turn the control
knob (C) to the steam position for a
few seconds. Then turn the control
knob towards the center to the
position "0".
Use a cloth to dry the frothing wand
–
and replace the frothing sleeve.
If extremely clogged, the frothing
–
tip can be unscrewed, and soaked
in warm soapy water.
In case no steam comes out of
–
the frothing wand, hardened milk
blocks its path. Carefully use a
needle to loosen the milk residue
from the opening of the frothing tip
to remove any blockage.
Once clean, rinse with running water –
from the tap and reassemble it.
HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS
For the appliance to work correctly
–
it should be kept free of limescale
or magnesium incrustations caused
by the use of hard water.
To prevent this kind of problem,
–
we recommend the use of water
with low lime or magnesium
mineralisation.
However, if it is not possible to use
–
the kind of water recommended
above, you should periodically
remove the limescale from the
appliance:
– Every 6 weeks if the water is
"very hard".
– Every 12 weeks if the water
is "hard".
A specific anti-lime scale product
–
should be used on this kind
of product.
Homemade solutions are not
–
recommended in the decaling
of this appliance, such as the use
of vinegar.
Repair
Take the appliance to an
authorised technical support
service if product is damaged
or other problems arise. Do not
attempt to disassemble or repair
the appliance yourself as this may
be dangerous.
EN ES