Mellerware Koffy! Manual Del Usuario página 6

FILLING WITH COFFEE
Remove the filter holder (E).
–
Insert the desired ground coffee
–
filter (L or M) into the filter holder.
FILTER EXTRACTION
The filterholder includes a spring
–
inside, whose function is to avoid
the fall of the sieve when throwing
the used coffee. That spring
produces a lateral tightening on
the filter.
Due to this tightening, to remove
–
the filter for exchange or cleaning,
it may be necessary to use a tool.
We recommend using a
–
roundtipped knife or a tip of a
teaspoon, so that it can be placed
between the upper edge of the
filterholder and the bottom of the
sieve wing.
A small turn will cause them to
–
separate from each other and will
facilitate the extraction
Filter L (smaller one) can be used
–
either for ground coffee or
paper pods.
We recommend using natural toast
–
coffee, as using some roasted
coffee may affect the operation of
the machine.
Fill the chosen removable filter (1 or
–
2 cups) with ground coffee (6-7 g
per cup to be prepared).
Using measuring spoon, for 1
–
coffee, put 1 spoonful and for 2
coffees, put in 2 spoonfuls.
Next lightly press down the ground
–
coffee with the back of the spoon.
Before fitting the filter holder in the
–
coffeemaker assembly, turn the
ladleholder backwards.
Fit the filter holder in the appliance
–
once more.
Position the filter holder in the
–
coffee assembly by inserting the
assembly downwards and turning
it anticlockwise, from left to right,
until it locks.
USE
Connect the appliance to
–
the mains.
Turn on the appliance by pressing
–
the start/stop button (G).
The pilot light (D) will flash red.
–
Wait until the pilot light (D) turns
–
blue, indicating that the correct
temperature has been reached.
Place one or two preheated cups
–
at the outlet of the portafilter.
Turn the coffee/steam selector (C)
–
to the coffee position.
The coffee delivery will start. When
–
you have obtained the desired
amount of coffee, turn the knob (C)
towards the central position 0.
Wait a few seconds and remove
–
the coffee cups.
Remove the filter holder (E) and
–
empty the grounds.
Wash the filter holder with water
–
and dry well.
Check that the removable filter
–
is perfectly positioned in the
filter holder.
Attach the filter holder to the
–
appliance again.
EN