Dell Networking S6000 Guía De Introducción página 32

To set up the RS-232 console port, follow these steps.
Step Task
Install an RJ-45 copper cable into the console port. Use a rollover cable to
1
connect the S6000 console port to a terminal server.
Connect the other end of the cable to the DTE terminal server.
2
Set the default terminal settings as follows:
3
• 9600 baud rate
• No parity
• 8 data bits
• 1 stop bit
• No flow control
Accessing the RJ-45 Console Port with a DB-9 Adapter
If the DTE has a DB-9 interface, you can connect to the console using an RJ-45
to DB-9 adapter along with the RJ-45 rollover cable.
assignments.
Table 6-1. Pin Assignments Between the Console and a DTE Terminal Server
Console Port
Signal
RTS
NC
TxD
GND
GND
RxD
NC
CTS
30
Installing the Software
RJ-45 to RJ-45 Rollover Cable
RJ-45 Pinout RJ-45 Pinout
1 8
2 7
3 6
4 5
5 4
6 3
7 2
8 1
Table 6-1 lists the pin
RJ-45 to DB-9 Terminal Server
Adapter Device
DB-9 Pin Signal
8 CTS
6 DSR
2 RxD
5 GND
5 GND
3 TxD
4 DTR
7 RTS