Operation; Basic Operation - Jensen MP1314 Manual Del Propietário

OPERATION

Basic Operation

Switching On/Off The Unit
Press the /MUTE button (7) to turn ON the unit. When the unit is ON, press and
hold /MUTE button (7) to turn OFF the unit.
Faceplate Release
Press the release button (2) to detach the removable faceplate.
Sound Adjustment
Press the volume knob (10) briefly to select the desired adjustment mode. The
adjustment mode will change in the following order:
VOL BAS
(Volume) (Bass)
Rotating the volume knob (10) clockwise or counter-clockwise, adjusts the audio
characteristics. The loud function is set to ON or OFF.
System Settings
Press and hold the volume knob (10) on the front panel to enter system setting
mode. Then briefly press the volume button (10) to select the item you want to
change and rotate the volume knob (10) to change the corresponding setting.
1. BEEP ALL/OFF/2ND
Use the volume knob (10) to set beep sound ON, ALL, 2ND or OFF. ALL will
beep when any key is pressed, 2ND setting will only beep when a key is
pressed and held.
2. AREA EUR/USA/SAM
Use the volume knob (10) to set the different area (Europe/USA/South
America) radio frequency spacing.
NOTE: When AREA USA is selected the following four options will not be available.
3. TA SEEK/ALARM
Use the volume knob (10) to set traffic announcements TA SEEK or TA ALARM.
• TA SEEK: When the TA function is enabled the unit will search for a radio
station with traffic announcements.
• TA ALARM: No automatic station search. If TA is enabled and no traffic
information is received then NO TP/TA is displayed on the screen.
4. PI SOUND/MUTE
Use the volume knob (10) to set the program information, PI SOUND or PI
MUTE function. In some cases a radio station may occupy two alternate
frequencies. The PI code includes the radio station's callsign, allowing you to
receive the same radio station under the alternate frequency.
14
TRB BAL
(Treble) (Balance)
MP1314
FAD LOUD
(Fader) (Loud)