Idiomas disponibles
Idiomas disponibles
THE ELECTRONIC
MONITOR.-
Important. Deposit all spent batteries
or
waste
packaging
containers, Fig.1.
FITTING THE MAIN CABLE Take
cable (M), sticking up out of the main
post (6), and plug it into connecter (N),
located at the back of the monitor (P).
Fig.2.
FITTING THE HAND-GRIP CABLE.
Take hold of the Hand-grip connector
(Z), Fig.3, and plug it into the
connector (Y) at the back of the
monitor (P), Fig.3 .
FITTING THE ELECTRONIC
MONITOR.-
Remove screws (4), Fig,2, from the
base of the monitor, then slide the
front of the monitor onto the plate on
the main post (6), Fig.3, making sure
not to snag any of the wires, fit the
screws (4) removed previously and
tighten securely.
ELECTRONIC MONITOR.
To make control over the exercise
more
comfortable
complicated, the lower section of the
display on this electronic device gives
simultaneous
distance
and
alternatively, revolutions per minute
(RPM), speed, calories and watts. The
top of the display shows a graph for
the selected program, along with its
number (programs from 1 to 12), or a
in
special
and
readings
of
pulse
rate,
English
manual operation graph for gauging
the desired exercise settings.
As soon as the transformer is plugged
into the back of the machine the
display will come on automatically
showing the message.
When the monitor is in stabd-by
mode, the screen displays the time,
date and temperature.
SETTING THE DATE & TIME.-
Whenever the adapter (138) Fig.4 is
unplugged from the mains supply the
memory erases all of the memories,
including the date. To set the date
follow these steps:
Plug the adapter (138) into the mains
socket. Characters will appear on the
monitor. Press MODE/ENTER and the
year will flash. Use the ▲▼ wheel
UP/DOWN to select the year. Press
the MODE/ENTER key and the month
will
flash.
UP/DOWN to select the month. Press
the MODE/ENTER key and the hour
less
will
flash.
UP/DOWN to select the hour. Press
the
MODE/ENTER
time,
minutes will flash. Use the ▲▼ wheel
or
UP/DOWN to select the minutes.
Press the MODE/ENTER key and the
display will be ready to begin the
exercise.
11
Use
the
▲▼
Use
the
▲▼
key
and
wheel
wheel
the
