Tabla de contenido
16 ENGLISH
To stop the alarm, press ALARM button or ON/OFF button.
To stop the alarm from coming on the following day, hold the ALARM button to turn it off. The
alarm icon
or
will disappear to indicate the alarm is disalarmed.
Setting the light intensity level
1. Use the light adjustment button 3 & 4 to set the light intensity level.
2. The light intensity level between 1 to 20 for alarm function.
Listening to Radio
1) Press the ON/OFF button to turn the unit on.
2) Press the FUNCTION button to select the Radio Mode.
3) Use the Tune + or Tune – button to select the desired FM station. If you press and hold the
Tune + or Tune – button for one second, then release, the unit will automatically scan to the
next broadcasting station.
4) Press the ON/OFF button to turn the radio OFF.
To set / recall the radio presets
The unit can preset 10 stations totally for FM.
1) Press the ON/OFF button to turn the unit on.
2) Press the FUNCTION button to select the Radio Mode.
3) Use the Tune + or Tune – button to select the desired FM station.
4) Press the Clock set / memory button; 'M01' will blink in the display.
5) Press the Clock set / memory button again to set the preset.
6) Repeat steps 2 through 4 to set more presets.
When 'M01- M10' is blinking, press the Tune + or Tune – Button to select the preset number.
When recalling preset stations, press memory Up to select the preset number.
Sleep operation
When listening to radio, press Snooze / Sleep button to enter sleep mode. You can just adjust
the sleep timer from 90 mins to 10 mins by pressing the Snooze / Sleep button. The unit will
automatically turn off after the selected time.
AUX IN
The AUX IN jack can be used to playback alternate audio signal sources on the unit speakers.
This AUX IN jack requires a 3.5 mm audio cable for input signal.
Note: The 3.5 mm audio cable is not included.
RESET
-
The reset button is located on the back of unit. Use a ballpoint pen to press it whenever you
change the batteries, or unit is not performing as expected. This will return all settings to
default value, and you will lose any stored data (alarm and clock settings).
PROJECTION UNIT
-
Focus setting: Adjust the projection clock brightness / focus by turning the brightness / focus
adjustment wheel until the projected time is clearly shown on the ceiling or wall.
-
To fl ip projected image by 180° fl ip button.
-
To deactivate projection, press PROJECTION ON/OFF button
Note: Projects time image on the ceiling or wall of a darkened room. Maximum projection distance
is 3-9 feet.
Tabla de contenido
