Tabla de contenido
W
FIG. 9A
9) Install the bottom drawer in the unit. Make sure that the Drawer Handle (U) is loose enough to al-
low the Drawer Face to move freely on the drawer false front. Adjust the drawer Face (EE) on the
Drawer False Front (C) so that it is centered side to side and using the Spacer (W), 1/8" above the
top of the base. See FIGURE 9A.
Tighten the screws on the drawer handle to help eliminate any shifting of the face. Insert four
#8 x 7/8" LoProfile Screws (Q) through the holes in the Drawer False Front (C) and fasten securely.
See FIGURE 9B.
Repeat for the other drawer. There should be a 1/8" gap between each drawer to allow for proper
functioning of the drawer slides.
PAGE 8 — 628W
Q
Q
Q
Q
FIG. 9B
Tabla de contenido
