Whittier Wood Products 628W Instrucciones Para Armar página 6

FIG. 4
STAIN TEST AREA
4) With the unit laying face down, measure from top left to bottom right
tom left / . The measurements should be equal. If
until measurements are equal. If
are equal. Attach the Back (K) to the sides, top, and lower sleeper with #6 x 5/8" Philtruss Screws
(Y) through the predrilled holes in the back. See FIGURE 4.
R
R
5) Attach a Drawer Side (B) to each end of a Drawer False Front (C) with two #8 x 1¼" Black Screws
(R) through the predrilled holes in the sides. The grooves for the Drawer Bottom must line up. Slide
the Drawer Bottom (D) into the grooves. Attach the Drawer End (A) to the Sides in the same man-
ner. See FIGURE 5A. Repeat with the other drawer.
Square the drawers by measuring from left front to right rear and from right front to left rear. The
measurements should be equal. If one is longer, hold the drawer by the corners on the longest line
and squeeze them together until square. See FIGURE 5B.
PAGE 6 — 628W
Y
Y
Y
Y
/ is longer, tap the bottom of the side at
R
FIG. 5A
Y
Y
Y
Y
Y
Y
/ is longer, tap the bottom of the side at
R
R
R
R
/ and from top right to bot-
until measurements
FIG. 5B