Whittier Wood Products 628W Instrucciones Para Armar página 5

FIG. 2
2) Attach the two Sleepers (H) to the Left Side (F) by gluing the dowels (V) into the upper holes and
inserting the Cam Connectors (M) into the lower hole. Insert Cam Housings (N) into the sleepers
and tighten securely. The edges of the sleepers should be flush with the edges of the sides. Attach
the Right Side (G) to the sleepers in the same way.
Attach the Base (J) to the front sleepers using #8 x 1¼" Black Screws (R). Keep the ends even
with sides and the bottom edges of the base and sides flush. Tighten securely. See FIGURE 2.
FIG. 3
3) Lower the Top (I) so that the six Cam Connectors (M) go into the six holes in the top of the Sides.
Insert the Cam Housings (N) and tighten securely. See FIGURE 3. Place the Upper Rail (L) against
the Top and flush with the front edge of the sides. Fasten in place with #8 x 1¼" Black Screws (R)
through the predrilled holes.
N
V
M
M
M
M
M
M
N
N
N
N
N
N
V
M
N
R
R
V
N
N
M
R
BACK VIEW
M
R
FIG. 3A
628W — PAGE 5