Enlaces rápidos
Model #
502KFBA
Nutmeg Finish
Eden Arm Chair
Assembly Instructions
Your piece of GardenWood furniture has been finished
at the factory with a tinted, penetrating oil that contains
an anti-fungal inhibitor. For best results, especially
in extreme climates, another coat of protective oil is
recommended before using for the first time. A surface
coating is vital for the protection of your furniture.
Treatment should be applied at least once or twice a
year.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: [email protected]
Fax: 541-687-2060 • Email: [email protected]
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and
Maintaining the Beauty of GardenWood Furniture
completely before beginning.
Inspect your furniture periodically for any loose
glue joints or screws, or any other problem which
may be affecting the stability of your furniture.
Tighten or repair as needed
Production Code:
We will replace any
Rev. 10/05
Manuales relacionados para Whittier Wood Products Garden Wood Furniture 502KFBA
Resumen de contenidos para Whittier Wood Products Garden Wood Furniture 502KFBA
- Página 1 Service Policy: We will replace any parts which are defective, missing or Assembly Instructions damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
- Página 2 502KFBA Eden Arm Chair — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list. 2 — Right Leg Assembly — Qty. 1 3 — Back — Qty. 1 5 — Seat — Qty. 1 4 —...
-
Página 3: Tools Required
502KFBA Eden Arm Chair ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Head Screwdriver, Outdoor Wood Glue, Hex Wrench (provided) STEP 1 1. Glue five Wood Dowels (B) into Right Leg Assembly (2) as shown in FIGURE 1. Attach Back (3) and Aprons (4) to Right Leg Assembly (2) gluing all dowels and securing with three Hex Bolts (A). - Página 4 Modelo # 502KFBA ACABADO NUEZ MOSCADA Silla con Brazos Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se Eden dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Instrucciones para Armar Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
-
Página 5: Outils Nécessaires
No. de modèle 502KFBA FINI MUSCADIER Fauteuil Eden Politique de service : Nous remplacerons toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- Instructions de Montage tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement. -
Página 6: General Maintenance
Presented by Whittier Wood Products In order to maintain the appearance and life of this GardenWood Furniture™ product, please follow these instructions. Finishing Tips A surface coating is vital for the protection of your furniture. Treatment should be applied at least once or twice a year.