Hitachi SPX-RCK5 Manual Del Usuario página 3

NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT
■ This controls the operation function and timer setting of the room air conditioner.
START/STOP Button
Press this button to start operation.
Press it again to stop operation.
OPERATION LAMP
FUNCTION Button
Use this button to select the
operating mode. Every time you
press it, the mode will change from
(AUTO) to (HEAT) to
(DEHUMIDIFY) and to (COOL)
cyclically.
SLEEP Button
Use this button to set the sleep
timer. ( Page 9)
Reserve Button
Timer setting reservation.
OFF TIMER Button
Select the turn OFF time.
ON TIMER Button
Select the turn ON time.
Precautions for Use
● Do not put the remote controller in the following places.
● Under direct sunlight.
● In the vicinity of a heater.
Handle the remote controller carefully. Do not drop it on the fl oor, and protect it from water.
●
Once the outdoor unit stops, it will not restart for about 3 minutes (unless you turn the power
●
switch off and on or unplug the power cord and plug it in again).
This is to protect the device and does not indicate a failure.
If you press the FUNCTION selector button during operation, the device may stop for about
●
3 minutes for protection.
All manuals and user guides at all-guides.com
Hr.
– 3 –
Transmission Sign
The transmission sign blinks
when a signal has been sent.
TEMPERATURE Button
Room temperature setting.
Value will change quicker when keep
pressing.
RESET Button
FAN SPEED Button
This determines the fan speed.
Every time you press this button,
the intensity of circulation will
change from (AUTO) to
to (MED) to (LOW) to
(SILENT) (This button allows selecting
the optimal or preferred fan speed for
each operation mode).
AUTO SWING Button
Adjustment of the conditioned air in
the upward and downward directions.
CANCEL Button
Cancel timer reservation.
(HI)