AneX Quant Manual De Instrucciones página 8

EN
8
CARRYCOT HOOD, FEET COVER
The carrycot is equipped with a hood that protects the child from rain,
snow, wind, sun. The position of the canopy of the stroller is adjusted by
pressing its top using the hand (Fig. 22).
To lock the hood (5 positions available), pull the hood and set it to the
desired position (Fig. 22).
To expand the hood enough to pull it over. If desired, the hood visor
can be hidden by wrapping it inside the stroller (Fig. 23). The shade
of the carrycot is ventilated, it is necessary to unzip it and then
unfasten its back (Fig. 24). In addition, it is possible to remove the
hood, unfastening the contour of the carrycot (Fig. 25).
The carrycot is equipped with rain cover, which is universal and can be
used for both the carrycot and the seat unit, which fastened to the stroller
by tightening the elastic band at the bottom of the rain cover (Fig. 26, 27).
The carrycot is equipped with a feet cover, which is worn from the front
of the carrycot and fastened with a zipper and carabiners (Fig. 28).
SEAT UNIT MOUNTING/DISMOUNTING
To install the seat unit, insert its adapters into the adapter pockets, which
are placed on the inside of the frame until a distinctive sound appears
(Fig. 29). The seat unit will be locked automatically. Installation of the
seat unit is possible in two positions: face in the direction of movement
of the stroller and face in direction of the mother.
To remove the seat unit, press the buttons of the adapters, which are
equipped with a memory function (Fig. 30) and lift it up (Fig. 31).
The back of the seat unit can be adjusted at an angle of inclination in 4
positions and moved to the 5th position for folding (provided that the
seat unit is installed face in the direction of movement of the stroller).
To adjust the position, press the button on the back of the seat unit and
set the desired angle (Fig. 32).
The back is also equipped with an additional summer ventilation (Fig.
33). To apply the summer ventilation, it is necessary to completely
unfasten the additional wedge of the fabric on the back of the seat unit.
Also, the back of seat unit is equipped with a zipper pocket, where you
can conveniently store the raincoat (Fig. 34).