How To Use - V-TAC VT-7405 Manual Del Usuario

HOW TO USE

1. Put the micro USB port into the power input of the desk lamp
FIG 1
2. Refer to the functions of each button in previous page (Outline) to use the lamp.
Short press is required to adjust the functions except that brightness increase and
decrease need long press.
3. When using the wireless
charging function, place phones
with Qi receiver onto the wireless
charging area. At this time, the
wireless charging indicator turns on
and flickers to indicate that wire-
less charging is ON. The indicator
turns off after the phone is
removed.
4. To charge a digital device, use a piece of charging cable to connect the USB
output port of desk lamp with the charging port of the device.
NOTES
1. To ensure using effect, please use an DC5V/3A adaptor and good quality cable
2. Among three functions of wireless charging, USB output and desk lamp. Only
two functions can be used the same time.
3. Please keep it away from water or other liquid
4. Power off the item before it is cleaned
FIG 3
USB Output Port
5V/3A Input Port
FIG 2