Ecoflam MAX GAS Serie Manual De Instrucciones página 4

LBKIT1 Max Gas
CHANGING FROM NATURAL GAS TO LPG OPERATION MAX GAS 170-250 P/PAB/PR
1
-Use a spanner 7 mm. and 8
mm. a medium cross screw-
driver.
5
-Unscrew the two fixing
screws and remove the diffu-
ser (spanner 8 mm.)
9
-Reassemble the diffuser
and the ignition electrode and
the ionisation electrode in the
correct position as shown in
the fig.
10
-Reassemble the blast tube
in the burner.
PROCEED AS FOLLOWS:
2
-Remove the blast tube from the
burner.
6
-Unscrew the fixing screw of the
LPG nozzle and remove it.
20
3
-Unscrew the fixing screw of the
ignition electrode.
7
-Unscrew the screws that hold
the natural gas aluminium front
part of the firing head using the
screwdriver and remove it.
A
A
pag.4
4
-Unscrew the fixing screw of
the ionisation electrode and
remove it.
8
-Install the LPG aluminium
front part of the firing head
and the LPG nozzle (cod.
KITGPL05). The notch of the
LPG nozzle must be in the
correct position.
Sez. A
3