Nice OVBT Instrucciones Y Advertencias Para La Instalación Y El Uso página 9

Important! - Manoeuvres for which the command is sent to an
automation located outside the operator's field of view are per-
formed under the full and direct responsibility of the operator.
To register with the Nice internet site
If you are not registered with the internet site www.niceservice.com,
before connecting to Oview the first time, you must register as follows:
01. With Oview connected to a powered-up control unit and the mod-
ule installed and configured, launch "Oview Software Suite".
02. On the main screen, click on the "Remote access" icon.
03. On the screen that now appears, click on "Nice Service Regis-
tration" and register as a user (important! - make a note of the
"username" and "password" used).
To connect to Oview the first time
If you are already registered with the internet site www.niceservi-
ce.com, proceed as follows:
01. Using a phone enabled for text messages, send a text message
to the number of the SIM card present in the Oview module,
including in the message the command "Gprs", the assembly "0"
and the address "0" (instructions on how to compose the mes-
sage are given in paragraph 3.2.2). Important! - perform the
following point within 5 minutes, otherwise you will have to
repeat point 01.
02. launch "Oview Software Suite" and on the main screen click on
the "Remote access" icon;
03. (fig. B) on the screen that now appears, enter the "username" and
"password" used for registering on the site www.niceservice.com;
04. in the "telephone" field enter the number of the SIM card present
in the Oview module you wish to communicate with;
05. lastly click on "connect": after a moment the software opens dis-
playing a main screen. It is ready to use.
3.2.3 - Installation and configuration of OVBTGSM module for
"Bluetooth" connection
To install and activate the bluetooth
the computer, refer to the instructions given in paragraph 2.1.
B
® connection between Oview and
English – 7