Nice OVBT Instrucciones Y Advertencias Para La Instalación Y El Uso página 16

• direct mode: this mode requires the condition that the data of the de-
vice to be added to a system are already memorised on a file. Then, in
the window displaying the system datasheet, click on the function
"Load from file" (on the browser bar) and select the required file.
• indirect mode: This mode envisages the following operations:
a) when the Software opens on the Home page, click on the icon
"Systems";
b) in the window displayed (window for management of stored sys-
tems -fig. 13) which requires selection of the system on which the
device is to be added (an existing system or a new version created at
the time);
c) after confirming the selection, clicking on the icon "Work on this
system", the software displays the Home page (fig. 4) specifying the
system on which the user is working;
14
14 – English
d) at this point, activate the area "Devices" and select the device to
be programmed;
e) , in the same window, click on the icon "System" and in the drop-
down (*) menu shown in fig. 14 , select "Add to system".
(*)Note – The drop-down menu contains different items; these are:
- first line: this states the name of the active system in italics, i.e. the
system on which the control unit receiver being programmed can be
saved.
- second line: this states the command "Add current device" to save
the (new) device programmed.
- other lines: these state the name of any devices already present on
the system. To modify one of these items, click on the required item
to access the window "Device configuration", in which the selected
device can be displayed for application of the values saved.