Nice OVBT Instrucciones Y Advertencias Para La Instalación Y El Uso página 12

6.1 – STARTING A WORK SESSION
To start a work session, the software must be starter; this displays the
Home page (fig. 4) This page shows various icons for access to differ-
ent areas:
1 - "Devices" (paragraph 6.2) – Area for functions specific to the con-
trol units and receivers connected via BusT4;
2 - "Systems" (paragraph 6.3) – Area for system management;
3 - "User console" (paragraph 6.5) – Function useful for control of all
automations in a system;
4 - "Remote access" (paragraph 6.6) – Area for activation of
Gps/Gprs type remote connection between the software and
Oview (if the OVBTGSM module is present on Oview);
5 - "Settings" (paragraph 6.4) – Area for management of specific soft-
ware setting parameters;
6 - "Exit" – To terminate a work session and exit the software.
To access these subjects, click on the icon required and proceed as
described in the dedicated paragraphs.
The next windows displayed for each subject are normally divided into
four sections (fig. 5):
(a) – "Control panel": area with general data of the device connected
and control keys;
(b) – "Functions menu": area with list of functions implemented by a
specific device connected.
(c) – General area with detailed information regarding specific functions.
(d) – Browser bar.
10 – English
5
(b)
6.2 – "DEVICES" Area
This area is used for management (control, programming, diagnostics,
maintenance, etc.) of the control units and receivers. To access this
area, proceed as follows:
01. In the Home page (fig. 4) clock on the icon "Devices".
02. The window "Device list" (fig. 6) is displayed, showing all devices
connected, including the Oview programmer, managed in the same
way as any other device.
The devices are displayed in the form of icons, each with the dif-
ferent symbol according to the type of device. The device name is
displayed under each icon.
6
(a)
(c)
(d)