Tabla de contenido
Starting up
- Set the knob to the left stop
- Place a magnetic rod in a vessel which is penetrable for magnetic field
lines and fill the vessel with the medium to be processed.
- Place the vessel on the centre of the base plate.
- Connect the appliance to a socket (the voltage stated on the name-
plate must correspond to the mains voltage).
- Set the speed using the knob
Maintenance and cleaning
The device is maintenance-free.
Cleaning
- For cleaning disconnect the mains plug!
- Use only cleaning agents which have been approved by IKA to clean
IKA devices.
These are water (with tenside) and isopropanol.
- Wear protective gloves during cleaning the devices.
- Electrical devices may not be placed in the cleansing agent for the
purpose of cleaning.
- Do not allow moisture to get into the device when cleaning.
- Before using another than the recommended method for cleaning or
decontamination, the user must ascertain with IKA that this method
does not destroy the device.
10
Accessories
IKA - stirring bars:
TRIKA 25
IKAFLON
®
20 (recommendation)
IKAFLON
®
30
Stirring bar remover
Warranty
In accordance with IKA warranty conditions, the warranty period is 24
months. For claims under the warranty please contact your local deal-
er. You may also send the machine direct to our factory, enclosing the
delivery invoice and giving reasons for the claim. You will be liable for
freight costs.
The warranty does not cover worn out parts, nor does it apply to faults
resulting from improper use, insufficient care or maintenance not car-
ried out in accordance with the instructions in this operating manual.
Technical data
Number of stirring positions
1
Stirring quantity max. per stirring position
l
1
(H
O)
2
Motor rating output
W
2
Direction of rotation
right
Speed control
turning
knob
Speed min.
rpm
0
Speed max.
rpm
2500
Stirring bar length min.
mm
20
Stirring bar length max.
mm
40
Set-up plate material
polyester
Set-up plate dimensions
mm
115x115
Automatic reverse rotation
no
Intermittent mode
no
Viscosity trend measurement
no
Break detection stirring bar
no
Timer
no
pH measurement
no
Graph function
no
Programs
no
Sensor in medium detection (Error 5)
no
Weighing function
no
Set-up plate illuminated
no
Width
mm
115
Depth
mm
129
Height
mm
37
Weight
kg
0.25
Permissible ambient temperature min.
°C
5
Permissible ambient temperature max.
°C
40
Permissible relative humidity
%
80
Protection class according to DIN EN 60529
IP 42
USB interface
no
RS 232 interface
no
Analog output
no
Voltage
V
100-240
Frequency
Hz
50/60
Power input
W
3
DC Voltage
V
12
Current consumption
mA
300
Subject to technical changes!
11
Tabla de contenido
