Correct Use; Unpacking; Commissioning; Maintenance And Cleaning - IKA lab dancer Instrucciones De Manejo

Correct use

The IKA ® lab dancer is designed for shaking test tubes.
Gently push the test tube into the soft attachment to
start shaking. Shaking stops as soon as you lift out the
test tube.

Unpacking

Please unpack the device carefully and check it for dama-
ge. It is important that any transport damage is detected
when the device is unpacked. If necessary, an inventory
of the damage should be made immediately (postal ser-
vice, railway, haulage company).
As supplied, the package contains:
The IKA ® lab dancer, a plug-in power supply unit and an
instruction manual.

Commissioning

Connect the appliance to a socket (Please refer to the
information in the "Technical Data" section).

Maintenance and cleaning

The IKA ® lab dancer is maintenance-free. It is subject
only to the natural wear and tear of components and their
statistical failure rate. Use only cleansing agents which
have been approved by IKA to clean IKA devices.
To remove use:
Dyes isopropyl alcohol
Constructions materials water containing tenside/
isopropyl alcohol
Cosmetics water containing tenside/
isopropyl alcohol
Foodstuffs water containing tenside
Fuels water containing tenside
For materials which are not listed, please request infor-
mation from IKA.
Wear the proper protective gloves during cleaning of the
devices. Electrical devices may not be placed in the cle-
ansing agent for the purpose of cleaning.
Before using another then the recommended method for
cleaning or decontamination, the user must ascertain
with the manufacturer that this method does not destroy
the instrument.
7