Toshiba RAS-10N3KVR Serie Manual Del Usuario página 3

2 PREPARATION BEFORE USE
Preparing Filters
1. Open the air inlet grille and remove the air filters.
2. Attach the filters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Clock Setup
1. Push by tip of the pencil.
If timer indication is flashing, go to the next step 2.
2. Press or : adjust the time.
3. Press : Set the time.
Remote Control Reset
Push by tip of the pencil or
1. Remove the batteries.
2. Press .
3. Insert the batteries.
AIR FLOW DIRECTION
3
FIX
Press : Move the louver in the
1
desired vertical direction.
SWING
Press : Swing the air
2
automatically and press again to stop.
3
For horizontal direction, adjust manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.
REMOTE CONTROL
4
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 On timer button (ON)
9 Off timer button (OFF)
! Setup button (SET)
" Clear button (CLR)
# Memory and Preset button (PRESET)
$ One-Touch button (ONE-TOUCH)
% High power button (Hi-POWER)
& Economy button (ECO)
( Quiet button (QUIET)
) Comfort sleep button (COMFORT SLEEP)
~ Plasma Air Purifier button (PURE)
+ Filter reset button (FILTER)
, Set clock button (CLOCK)
- Check button (CHECK)
. Reset button (RESET)
Note:
• The provided Remote Controller is a wireless type, which also can be used as
a wire. Please see "How to Connect The Remote Controller for Wired
Operation", located in installation instruction, in case of wired control is required.
• In wire operation, remote controller will return to initial condition (PRESET,
TIMER and CLOCK will return to initial condition) when user shutdown power
supply of Air conditioner.
ONE-TOUCH
5
Press the "ONE-TOUCH" button for fully automated operation that is customized
to the typical consumer preferences in your region of the world. The customized
settings control temperature air flow strength, air flow direction and other settings
to provide you alternate contact with "ONE-TOUCH" of the button. If you prefer
other settings you can select from the many other operating functions of your
Toshiba unit.
ONE-TOUCH
Press : Start the operation.
TSB 1110650191 (01_EN).indd 3 TSB 1110650191 (01_EN).indd 3
To automatically select cooling, heating or fan only operation
10
11
1
#
4
2
6
3
5
SWING FAN
7
12
(
$
ONE-TOUCH FIX QUIET
~ %
PURE Hi POWER
&
"
COMFORT
8 9
SLEEP
) !
- .
, +
13
6 AUTOMATIC OPERATION
MODE
1. Press : Select A.
2. Press : Set the desired temperature.
FAN
3. Press
: Select AUTO, LOW , LOW+
HIGH .
7 COOLING / HEATING / FAN ONLY OPERATION
MODE
1. Press : Select Cool , Heat
2. Press : Set the desired temperature.
Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature indication
FAN
3. Press : Select AUTO, LOW , LOW+
or HIGH .
DRY OPERATION
8
For dehumidification, a moderate cooling performance is controlled automatically.
MODE
1. Press : Select Dry .
2. Press : Set the desired temperature.
9 AIR PURIFYING OPERATION
PURE
Press to start and stop plasma air purifier and air ionizer operation.
The plasma air purifier and air ionizer can be activated or deactivated by pressing the
PURE button. The air ionizer starts in conjunction with plasma air purifier operation.
Note: The FILTER indicator (orange) turns on after PURE operation is performed
for about 1000 hours.
Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating
operation (except in DRY and FAN ONLY mode)
Press Hi POWER : Start and stop the operation.
ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
:
Press Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.
TEMPORARY OPERATION
In case of the misplaced or discharged remote control
• Pressing the RESET button, the unit can start or
stop without using the remote control.
• Operation mode is set on AUTOMATIC operation,
preset temperature is 25°C and fan operation is
automatic speed.
TIMER OPERATION
Set the timer when the air conditioner is operating.
Setting the ON Timer
Press : Set the desired
1
ON timer.
2
Press : Set the timer.
3
Press : Cancel the timer.
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
, MED
, MED+
, or
EN
, or Fan only .
ES
, MED , MED+ ,
FR
IT
DE
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
RO
Setting the OFF Timer
BG
Press : Set the desired OFF
timer.
EE
Press : Set the timer.
LV
Press : Cancel the timer.
SK
SI
7/31/12 3:54 PM 7/31/12 3:54 PM