Gima TH996A-V1 Manual De Instrucciones página 5

5
FEATURES
The GIMA electronic baby scale is a device suitable to weigh a newborn and measure its height.
The scale is very precise and has an automatic zero setting feature. It switches off automatically after 30 seconds. A
washable sheet is supplied along with the scale to cover the plate during measurements along with a metric wheel
to measure the baby's height.
Technical Features
Maximum capacity: 20 Kg / 44 lbs
Graduation: 10 g
Working temperature: 5°C - 35°C
Power supply: 4 AA 1,5V batteries
PRESCRIPTIONS
Do not use the equipment in case it is damaged. Apply to your retailer.
Avoid precarious repairs. Repairs shall be carried out with original spare parts only, which shall be installed accord-
ing to the intended use.
Since the product is made of corrosion-proof materials suitable for the enviromental conditions foreseen for its
normal use, does not require special care, however it is necessary to store it in a closed place making sure that is
protected from dust and dirt to assure its hygenic conditions.
We recommend not leaving the newborn baby on the scale unattended and do not leave the scale within the baby's
reach.
UNPACKING
Always remember that packing elements (paper, cellophane, stitches, adhesive tape, etc.) can cut and/or
hurt if they are not carefully handled.
They shall be removed with adequate means and shall not be left at the mercy of irresponsible persons; the
same is valid for tools used to remove packages (scissors, knives, etc.).
After opening the packages, first of all it is necessary to check all pieces and parts composing the product. Check
that they are all present and in perfect conditions.
INSTALLATION
The first operation after removing the scale from its box is to insert the batteries.
The battery box is on the base of the scale. Install 4 new batteries. Verify that the polarity is correct and close the lid.
The baby scale does not require calibration but it must be perfectly positioned on a flat surface.
OPERATION
Make sure there are no foreign objects under the baby scale and that the feet are touching the supporting surface.
Press the ON/OFF button and wait a few seconds without placing anything on the scale. When scale is turned on,
the last measurement value (no less than 0.5kg and locked), if any, will be displayed, and then it resets to 0.00.
When the display shows "0.00" the baby scale is ready for use.
The scale is generally set in kg. to change the unit of measure, after having turned on the scale, press on/off key
again before it displays 0.0. Every time the button is pressed it is possible to choose between kg o lb, the display
shows the selected measure.
To distract the newborn and make weighing operations easier it is possible to play a melody by pressing the "MU-
SIC" button. To deactivate the music press the same button again.
Read the weight value flashing on the display. If the baby scale exceeds the maximum capacity the display shows
"0-LD". When weight is removed, it resets to 0.00.
Do not whack.
Do not pile sundries on the scale.
Do not immerse in water.
Do not weigh heavy loads and make sure the baby does not move on the plate, the loading cell may get
damaged!
If the scale is not used, it automatically switches off after about 30 seconds. To switch off the unit by hand press the
ON/OFF button after having removed the baby from the scale.
Remove batteries if the product is not used for a long time.
Minimum capacity: 20 g
Height measurement: 0-150 cm / 0-60 in
Storage temperature: -10°C - 60°C
Tolerance: <5.00kg/±0.02kg, ≥5.00kg/±0.2%+0.01kg
ENGLISH