Firmware Update - Sveon SPremiere Serie Manual De Usuario

Create a folder: Press "Edit" button of the remote control and
select "New folder"; a virtual keyboard will appear. Use the
arrow buttons and "Enter" buton to select the name for the
new folder. Press "FAV" button of the remote control if you
want to amend the last character. Once you have written the
new name, press "Stop" button to exit and save the new fol-
der name or press "Exit" to cancel and exit without save the
new folder name.
Change output resolution: Press "HDMI/AV" button several times until choose the signal output (576i, 720p or 1080i).
Copy
This function allows you to copy files between the different storage devices or between different folder in the same unit if
these storage units are formatted under FAT32 file system. Follow these steps:
1. Go to "Files" option in Main Menu. Copy and Paste options
are not available in the rest of Main Menu options.
2. Select the file you want to copy, press "Edit" button of the remote control and use the arrow buttons to select "Copy" op-
tion.
3. Go to the folder where you want to save the file, press "Edit" button of the remote control and use the arrow buttons to
select "Paste" option. Wait until the process finishes.
4. If you want to copy the file in other storage device, select "Copy" function and press "Disk" button to select the storage
unit where you want to save the file. Press "Edit" and choose "Copy" option to complete this process.
Direct Copy
Direct Copy function allows you to copy all the files saved in your memory card or external USB storage device to the inner
hard disk of the device. This function is only available under FAT32 file system and it doesn´t allow you to select files: all
the files will be copied.
1. Go to "Files" option in the Main Menu. Direct Copy function is only available in "Files" option.
2. Press "Copy" button of the remote control. The file copy process will start and the device will create a new folder for these
copied files.
3. You can stop this process by pressing "Stop" button.

12. Firmware update

SPM1000 allows you to update its firmware to enjoy improvements and new functions for your device. The firmware up-
gradings are avaialble in the Sveon official website; you can also ask for them to our Technical Support Department:
email: [email protected] | Tlf. +34 902 402 503
Follow these steps to upgrade the firmware of your device:
1. Copy the upgrading file in the inner hard disk of the device, in a memory card or in an external USB device.
2 Connect the external storage device to the unit and turn it on.
3. Access to "File" option in Main Menu and look for the upgrade file. Use the arrow buttons to select it and press "Enter"
button of the remote control. Wait during the upgardin gprocess.
4. During this process please do not press any key of the remote control. Besides, it is very important the unit is not
powered off because it may damage seriously the device.
SPM1000 User Guide
Index
1. Welcome
2. Features
3. System Requirements
4. Content
5. Hardware
6. Remote Control
7. TV Connections
7.1 AV Connection
7.2 HDMI Connection
8. Playback from external storage devices
8.1 USB external storage device
8.2 Direct playback from memory cards
9. First time usage
9.1 Main Menu
9.1.1 DVB-T
9.1.2 Movie
9.1.3 Music
9.1.4 Pictures
9.1.5 Files
9.1.6 Slide Show
10. Setup Menu
11. Basic operations
12. Firmware upgrading
13. FAQs
English 28